Melting gold is a process that requires specific equipment and safety measures due to the high temperatures involved.
Materials and Equipment Needed
Gold: Scrap gold or gold items.
بوتقة: A crucible is a specially designed container that can hold molten gold and withstand extremely high temperatures. Crucibles are usually made of graphite, carbon, or clay.
Heating Source: A furnace or a blowtorch capable of reaching at least 1,064°C (1,947درجة فهرنهايت).
Flux: Borax or another type of flux to help purify gold.
Crucible Tongs: used to move and fix the crucible, the crucible tongs also need to be made of heat-resistant materials.
واقية: Gloves, goggles, and protective clothing.
قالب: A mold to pour the melted gold into.
خطوات صهر الذهب
1. تحضير:
أمان Gear: Wear protective gear to ensure safety.
Work Area: Ensure your work area is well-ventilated and free from flammable materials.
2. Setup:
Place the crucible in the furnace or position it securely if using a blowtorch.
أضف كمية صغيرة من التدفق (borax) to the crucible. Flux helps to separate impurities from the gold during melting.
3. ذوبان:
Add the gold to the crucible. If you have multiple pieces, it’s better to add them slowly as they melt.
Heat the crucible with the furnace or blowtorch. Apply heat evenly to avoid hot spots.
Monitor the gold as it heats. It will turn red, then orange, and finally become a bright yellow liquid as it reaches its melting point (1,064°C or 1,947°F).
4. Purification:
The flux will combine with impurities and form a slag on the surface of the molten gold.
Skim off the slag with a metal rod or tongs, ensuring that only pure gold remains.
5. صب:
When the liquid temperature reaches 1200~1300°C and the mold temperature reaches 150-180°C, the molten gold is injected into the center of the mold along the vertical direction of the long axis of the mold.
Use tongs to handle the crucible as it will be extremely hot.
The casting speed should be fast, steady, and uniform to avoid violent fluctuations of the gold liquid in the mold. After casting, wait for the gold to condense and remove it from the mold.
6. Final Steps:
After the gold has cooled, remove it from the mold.
Clean the gold piece, if necessary, to remove any remaining impurities or slag.
اعتبارات السلامة:
Always wear protective gear, بما في ذلك القفازات المقاومة للحرارة, safety goggles, and long-sleeved clothing.
Work in a well-ventilated area to avoid inhaling any fumes.
Be aware of your surroundings and keep flammable materials away from the work area.
Have a fire extinguisher or a bucket of sand nearby in case of emergencies.
By following these steps and taking appropriate safety measures, you can successfully melt gold and cast it into new shapes or forms.